NASA Supported Hydrogen Research University of Florida
November 24, 2009

 
Inserting silicon wafers into the micromolding platform.
 
Precision parts created using a micromolding process.
 

Presentations

May 2005  
AGENDA - May 2005 Review Meeting
Introduction by Dr. Tim Anderson
Introduction by Dr. David Block
FSEC Sensor Projects - Overview Presentation
Dr. Ali Raissi, FSEC
FSEC - Smart Paints
Dr. Ali Raissi, FSEC
UF - Sensor Projects - Overview Presentation
Dr. Jenshan Lin, UF
FSEC Storage Projects - Overview Presentation
Dr. Ali Raissi, FSEC
UF - Hydrogen Storage and Transport - Overview Presentation
Dr. James Klausner, UF
FSEC Production Projects - Overview Presentation
Dr. Ali Raissi, FSEC and Dr. David Block, FSEC
FSEC - Hydrogen Production from Used Lube Oil via Supercritical Water Reformation
Dr. Karthikeyan K. Ramasamy, FSEC and Dr. Ali Raissi, FSEC
UF - Hydrogen Production With Advanced Protonic Conductors
Dr. Eric Wachsman, UF
UF - PEM Fuel Cell Research Effort
Dr. Mark Orazem, UF
UF - Rational Design of Higher Conductivity Solid Oxide Electrolytes
Dr. Eric Wachsman, UF
FSEC & FAMU - Fuel Cells - Overview Presentation
Dr. Clovis Linkous, FSEC
FSEC - Related Projects
Dr. David Block, FSEC, Dr. Ali Raissi, FSEC and Dr. Van Sciver, FSU
AGENDA For Florida Institute of Technology Presentations - May 2005 Review Meeting
FIT - University Overview
Florida Institute of Technology
FIT - Materials Technology for Hydrogen Sensing and Fuel Cell Innovations
Dr. Barry Grossman, FIT and Dr. Susan Earles, FIT
FIT - PEM Fuel Cell Modeling: Gas Diffusion Layer Transport Effects & Gas Flow Dynamics
Dr. Manolis Tomadakis, FIT and Dr. Mark Archambault, FIT
FIT - UAV Powered by Hydrogen Supplied from NaBH4
Dr. Pavvo Sepri, FIT and Dr.John Thomas, FIT
Copyright (c) 2007 NASA Supported Hydrogen Research.
All rights reserved.
University of Florida