 |
| Inserting silicon wafers into the micromolding
platform. |
 |
| Precision parts created using a micromolding
process. |
|
Fuel Cells list of Publications
Dr. Lisa McElwee-White
- "Electrochemical Oxidation of Methanol Using Alcohol-Soluble
Ru/Pt and Ru/Pd Catalysts," Serra, D.; McElwee-White, L. Inorg.
Chim. Acta, in press.
- "Electronic Interactions in Fe- and Ru-Containing
Heterobimetallic Complexes: Structural and Spectroscopic
Investigations," Serra, D.; Abboud, K.A.; Hilliard, C.R.; McElwee-White,
L., Organometallics, 2007, 26, 3085-3093.
- "Catalysis of the
Electrooxidation of Biomass-Derived Alcohol Fuels," Anthony, C.R.;
Serra, D.; McElwee-White, L. in Materials, Chemicals and
Energy from Forest Biomass. Argyropoulos, D.S., Ed. ACS
Symposium Series, 2007, 954, 296-310.
- "Electrocatalytic
Oxidation of Methanol," Anthony, C.R.; McElwee-White, L., in
Feedstocks for the Future: Renewables for the Production of
Chemicals and Materials. Bozell, J., Ed. ACS Symposium
Series No. 921, 2006, pp. 130-142.
- "Electrochemical
oxidation of methanol using dppm-bridged Ru/Pd, Ru/Pt, and Ru/Au
catalysts," Yang, Y.; McElwee-White, L. Dalton Trans.,
2004, 2352-2356.
- "Selective
electrochemical oxidation of methanol to dimethoxymethane using Ru/Sn
catalysts," Anthony, C.R.; McElwee-White, L. J. Mol. Catal. - A:
Chem., 2004, 227, 113-117.
Presentations
(invited):
- University of
California, Berkeley, February 10, 2004
- University of Illinois,
Chicago, September 21, 2004
- Western Kentucky
University, November 19, 2004
- Wayne State University
(Frontiers in Chemistry Lecture), April 18, 2005
- Université Pierre et
Marie Curie (Paris 6), September 6, 2005
- Eastman Chemical
Company, May 18, 2006
- University of
Illinois, April 2, 2007
- Washington and Lee
University, April 27, 2007
- "Electrooxidation of
Alcohols Using Heterobimetallic Catalysts," Symposium on
Feedstocks for the Future: Renewables for the Production of
Chemicals and Materials, 227th National Meeting of the American
Chemical Society, March 2004, Anaheim, California. Abstract CELL
80.
- "Bimetallic catalysts
for electrooxidation of methanol," NASA-UF Workshop for Advanced
Fuel Cell Research, May 2004, Gainesville, Florida
- "Heterobimetallic
complexes as electrocatalysts for the oxidation of methanol,"
McElwee-White, L.; Serra, D.; Yang, Y.; Anthony, C.R. Symposium
on Materials, Chemicals and Energy from Forest Biomass, 2005
International Congress of Pacific Basin Societies, December 2005,
Honolulu, Hawaii.
- "Electrooxidation of
ethanol and methanol using heterobimetallic catalysts," Symposium
on Feedstocks for the Future, 234th National Meeting of the
American Chemical Society, August 2007, Boston, Massachusetts.
Presentations (contributed):
- "Selective
Electrochemical Oxidation of Methanol to Dimethoxymethane Using Ru/Sn
Catalysts," Anthony, C.R.; McElwee-White, L. 2004 Florida Annual
Meeting and Exposition, May 2004, Orlando, Florida.
- "Selective
Electrochemical Oxidation of Methanol to Dimethoxymethane Using Ru/Sn
Catalysts," Anthony, C.R.; McElwee-White, L. 228th National
Meeting of the American Chemical Society, August 2004,
Philadelphia, Pennsylvania. Abstract INOR 672
- "Selective
electrochemical oxidation of methanol to dimethoxymethane using Ru/Sn
catalysts," Anthony, C.R.; McElwee-White, L., Florida Inorganic
Mini-Symposium, October 2004, Tampa, Florida"Synthesis and
Characterization of Heterobimetallic Catalysts for Electrochemical
Oxidation of Methanol: Comparative Reactivity Between Ru and Fe
Complexes," Serra, D.; McElwee-White, L. Florida Inorganic
Mini-Symposium, September 2005, Gainesville, Florida
- "Electrocatalytic
oxidation of methanol by Ru and Fe heterobimetallic complexes,"
Serra, D.; McElwee-White, L. 231st National Meeting of the
American Chemical Society, March 2006, Atlanta, Georgia. Abstract
INOR 650.
- "Electrocatalytic
Oxidation Of Methanol By Ru And Fe Heterobimetallic Complexes,"
Serra, D.; McElwee-White, L. 2006 Florida Annual Meeting and
Exposition, May 2006, Orlando, Florida.
- "Electrochemical
oxidation of methanol by heterobimetallic Ru and Fe analogue
complexes," Serra, D.; McElwee-White, L. 230th National Meeting
of the American Chemical Society, September 2006, San Francisco,
California. Abstract INOR 679.
- "Electrochemical
oxidation of methanol by heterobimetallic Ru and Re analogue
complexes," Serra, D.; McElwee-White, L. Florida Inorganic
Mini-Symposium, October 2006, Gainesville, Florida.
Dr. James Klausner and
Dr. Renwei Mei
- “A Flow Boiling
Microchannel Evaporator Plate for Fuel Cell Thermal Management,”
Garrity, P., Klausner, J.F., and Mei, R., Heat Transfer
Engineering, Vol. 28, No. 10, pp. 877-884, 2007.
- “Performance of Metallic
and Carbon Foams for Augmenting Condensation Heat Transfer,”
Garrity, P., Klausner, J.F., and Mei, R., Proceedings of the
2007 ASME-JSME Thermal Engineering Conference and Summer Heat
Transfer Conference, July 8-12, Vancouver, BC, Canada, 2007.
- “A Flow Boiling
Microchannel Evaporator Plate for Fuel Cell Thermal Management,”
Garrity, P., Klausner, J.F., and Mei, R., Proceedings of the
Sixth International Conference on Boiling Heat Transfer,” 2006.
Presentations
- Multi-Scale
Computational Fluid Dynamics With Interfaces, Jianghui Chao,
Renwei Mei, and Wei Shyy, 59TH ANNUAL MEETING OF THE DIVISION OF
FLUID DYNAMICS, Marriott Tampa Waterside, November 19-21, 2006,
Tampa, Florida
Dr. Jenshan Lin, Dr.
Steve Pearton, Dr. Fan Ren
- “Analysis and Design of
AlGaN/GaN HEMT Resistive Mixers”, T. Chang, W. Wu, J. Lin, S.
Jang, F. Ren, S.J Pearton, R. Fitch and J. Gillespie,Microwave and
Optical Techn. Lett. 49,1152 (2007).
- “AlGaN/GaN high electron
mobility transistors on Si/SiO2/poly-SiC substrates”, T.
J.Anderson, F. Ren, L. Voss, M. Hlad, B. P. Gila, L. Covert, J.
Lin, S. J. Pearton, P. Bove, H. Lahreche, and J. Thuret, J. Vac.
Sci. Technol. B 24, 2302 (2006).
- “Laser ablation of via
holes in GaN and AlGaN/GaN high electron mobility transistor
structures”, Travis Anderson, Fan Ren, S. J. Pearton, Michael A.
Mastro, Ron T. Holm, Rich L. Henry, Charles R. Eddy, Jr., Joon
Yeob Lee, Kwan-Young Lee, and Jihyun Kim , J. Vac. Sci. Technol.
B 24, 2246 (2006).
- “A high efficiency
class-F power amplifier using AlGaN/GaN HEMT”, Sangwon Ko ,
Wenhsing Wu , Jenshan Lin , Soohwan Jang , Fan Ren , S.J. Pearton
, Robert Fitch and James Gillespie, Microwave and Optical
Technology Letters,48, 1955(2006).
- “Thermal Considerations
in Design of Vertically Integrated Si/GaN/SiC Multichip Modules”,
T.J. Anderson, F. Ren, L. Covert, J. Lin and S.J. Pearton, J.
Electrochem. Soc.153 G906 (2006).
- “Electrical Performance
of GaN Schottky Rectifiers on Si Substrates”, L. Voss, S.J.
Pearton, F. Ren, P. Bove, H. Lareche and J.Thuret, J. Electrochem.
Soc. 153, G681(2006).
- “Si diffused GaN for
enhancement mode GaN MOSFET on Si applications”, S.Jang, F.Ren,
S.J.Pearton, B.P.Gila, M.Hlad, C.R.Abernathy, H.S.Yang, C.J.Pan,
J.I.Chyi, P.Bove, H. Lareche and J. Thuret, J. Electron. Mater.
35,685(2006).
- “Comparison of laser
wavelength operation for drilling of via holes in AlGaN/GaN HEMTs
on SiC substrates”, T.Anderson, F. Ren, L.Covert, J.Lin,
S.J.Pearton, T.Dalrymple, C.Bozada, R.Fitch, N.Moser, R .Bedford
and M. Schimpf”, J.Electron. Mater. 35,675(2006).
- “Thermal Simulations of
three-dimensional Integrated Multichip Module with GaN power
amplifier and Si modulator”, T.J. Anderson, F. Ren, L.Covert,
J.Lin and S.J. Pearton, J. Vac .Sci. Technol. 24,284(2006).
Presentations
- T.J. Anderson, F. Ren,
L. Voss, M. Hlad, B.P. Gila, S.J. Pearton, J.Kim, J. Lin, P. Bove,
H. Lahreche, J. Thuret, and R. Langer, 2007 Mantech
Conference,Austin,TX, May 2007.
- “Microwave Performance
of AlGaN/GaN High Electron Mobility Transistors on Si/SiO2/Poly-SiC
Substrates”, T. Anderson, F. Ren, L. Covert, J. Lin, S. J. Pearton,
J. Thuret, P. Bove and H. Lahreche, TMS Annual Meeting and
Exhibition, Orlando, FL, Feb 2007.
- “AlGaN/GaN High Electron
Mobility Transistors on Si/SiO2/poly-SiC Substrates”, Travis
Anderson, Fan Ren, Lars Voss, Mark Hlad, Brent Gila, S.J. Pearton,
Lance Covert, Jenshan Lin, Julien Thuret, P. Bove and H. Lahreche,
MRS Fall Meeting, Boston, Nov 2006.
-
- "SiC Via Fabrication and
Integration for Wide Bandgap HEMT/MMIC Devices", by R. Shul, M.
Overberg, A. Baca, C. Sanchez, J. Stevens, L. Voss, K. Ip, S.
Pearton, M. Martinez, M. Armendariz and G. Wouters, 210th Meeting
of ECS, Cancun, Mexico, Nov 2006.
- “Hydrogen sensitive
Schottky diodes on free-standing GaN Rectifiers”, L.Voss, B.P.
Gila and S.J. Pearton, Hung-Ta Wang and F. Ren, 208th ECS Meeting,
Los Angeles, CA Oct 2005.Dr. Mark Orazem
Dr. Mark Orazem
- S. K. Roy and M. E.
Orazem, “Error Analysis of the Impedance Response of PEM Fuel
Cells,” Journal of the Electrochemical Society, (2007), in
press.
- S. K. Roy, M. E. Orazem,
and B. Tribollet “Interpretation of Low-Frequency Inductive Loops
in PEM Fuel Cells,” Journal of the Electrochemical Society,
(2007), submitted.
- S. K. Roy and M. E.
Orazem, “Interpretation of Low-Frequency Inductive Loops in PEM
Fuel Cell Impedance Data in Terms of Reactions Influencing the
Life-Time of Fuel Cell Performance,” Proceedings of the 2007 NHA
Annual Hydrogen Conference, the National Hydrogen Association,
Washington, DC, 2007.
- S. K. Roy and M. E.
Orazem, “Analysis of Flooding and Performance of a PEM Fuel Cell
with Interdigitated Flow Channels by EIS Techniques,” manuscript
in preparation.
- S. K. Roy and M. E.
Orazem, “Deterministic Impedance Models for Interpretation of
Low-Frequency Inductive Loops in PEM Fuel Cells,” in Proton
Exchange Membrane Fuel Cells 6, T. Fuller, C. Bock, S.
Cleghorn, H. Gasteiger, T. Jarvi, M. Mathias, M. Murthy, T.
Nguyen, V. Ramani, E. Stuve, T. Zawodzinski, editors, ECS
Transactions, 3:1, (2006), 1031-1040.
Presentations
- S. K. Roy and M.
E. Orazem, “Flooding Analysis of an Interdigitated Flow Channel
in PEM Fuel Cell by EIS Technique,” to be presented at the
212th meeting of the Electrochemical Society, Washington, DC,
October 9 - 12, 2007.
- M. E. Orazem, “An
Integrated Approach to Impedance Spectroscopy,” invited plenary
lecture to be presented at the Seventh International Symposium on
Electrochemical Impedance Spectroscopy, Argelés sur Mer, France,
June 3-8, 2007.
- M. E. Orazem and S. K.
Roy, “On Modeling the Impedance Response of PEM Fuel Cells,”
Invited lecture, to be presented at the International Conference
“Polymer Batteries Fuel Cells-PABFC-2007” on the occasion of
Professor Scrosati’s 70th birthday, Rome, Italy, June
11-15, 2007.
- S. K. Roy and M. E.
Orazem, “Interpretation of Low-Frequency Inductive Loops in
PEM Fuel Cell Impedance Data in Terms of Reactions Influencing
the Life-Time of Fuel Cell Performance,” presented at The NHA
Annual Hydrogen Conference, March 19-22, 2007, San Antonio, Texas.
- S. K. Roy and M. E.
Orazem, “Interpretation of Low-Frequency Inductive Loops in
PEM Fuel Cell Impedance Data,” presented at the 210th
meeting of the Electrochemical Society, Cancun, Mexico, October 29
- November 3, 2006.
- S. K. Roy and M.
E. Orazem, “Application of Measurement Models to Impedance Data
of PEMFC,” presented at the 209th Meeting of The
Electrochemical Society, Denver, Colorado, May 7-12, 2006.
Dr. Tony Schmitz and Dr.
Gregory Sawyer
- “Micromolding
Three-Dimensional Amorphous Metal Structures”, Bardt, J., Bourne,
G., Ziegert, J., Schmitz, T., and Sawyer, W.G., 2007Journal of
Materials Research (accepted).
- “Closed Channel
Fabrication using Micromolding of Metallic Glass”, Bardt, J.,
Bourne, G., Schmitz, T., Sawyer, W.G., and Ziegert, J., 2007, to
appear in Proceedings of the 2007 International Manufacturing
Science & Engineering Conference (MSEC2007), October 15-18, 2007,
Atlanta, GA.
- “RCSA Application to
Micro/Meso-scale Endmills”, Cheng, C.-H. and Schmitz, T., 2007,
to appear in Proceedings of the 2007 International Manufacturing
Science & Engineering Conference (MSEC2007), October 15-18, 2007,
Atlanta, GA.
- “Precision Molding of
Complex Metallic Micro-structures”, Bardt, J., Ziegert, J.,
Schmitz, T., Sawyer, W.G., and Bourne, G., 2006, 1st
International Conference on Micromanufacturing, University of
Illinois, Urbana-Champaign, September 13-15.
- “Precision Molding of
Metallic Micro-components”, Bardt, J., Mauntler, N., Ziegert, J.,
Sawyer, W.G., and Schmitz, T., 2005, Proceedings of
American Society for Precision Engineering Annual Meeting, October
9-14, Norfolk, VA.
- “Precision Molding of
Metallic Micro-Components”, Bardt, J., Mauntler, N., Sawyer, W.G.,
and Ziegert, J.C., Proceedings of the 2005 ASPE Annual Meeting.
- “Metallic Glass Surface
Patterning by Micro-molding”, Bardt, J., Mauntler, N., Bourne, G.,
Schmitz, T., Ziegert, J., and Sawyer, W.G., 2005, Proceedings of
American Society of Mechanical Engineers International Mechanical
Engineering Congress and Exposition, IMECE2005-81099, Orlando, FL.
- “Fuel Cell Collector
Plate Fabrication by Micro-molding”, Bardt, J., Mauntler, N.,
Bourne, G., Schmitz, T., Ziegert, J., and Sawyer, W.G., 2005, 1st
Symposium on Manufacturing of MEAs for Hydrogen Applications,
August 9-11, Dayton, OH.
- “An Approach for Micro
End mill Frequency Response Predictions”, Cheng, C.-H., Schmitz,
T., Arakere, N., and Duncan, G.S., 2005, Proceedings of American
Society of Mechanical Engineers International Mechanical
Engineering Congress and Exposition, IMECE2005-81215, Orlando, FL.
- “Precision Molding of
Metallic Micro-Components”, Sawyer, W.G., Ziegert, J., Bardt, J.,
and Mauntler, N., Proceedings of 2005 National Science Foundation
DMII Grantees Conference, Scottsdale, AZ (on CD).
- “Surface Patterning on
Metallic Glasses”, Sawyer, W.G., Bardt, J., Mauntler, N., Bourne,
G., and Schmitz, T., Proceedings of the 2005 STLE Annual Meeting
and Exhibition.
Dr. Eric Wachsman
- “Mechanical Properties
of Ceria by Molecular Dynamics Simulation,” H. Xu, R. K. Behera,
Y. Wang, F. Ebrahimi, S. B. Sinnott, E. D. Wachsman, and S. R.
Phillpot, Solid State Ionics, submited.
- “Higher Ionic Conductive
Ceria Based Electrolytes for SOFCs,” S. Omar, E. D. Wachsman, and
J. C. Nino, Applied Physics Letters, accepted.
- “A Soft Chemistry Route
for the Synthesis of Nanostructured Pb2Ru2O6.5
with Controlled Stoichiometry,” V. Esposito, D. Marani, E. D.
Wachsman, and E. Traversa, Journal of the American Ceramic
Society, submitted.
- "Effect of Electrode
Microstructure on the Sensitivity and Response Time of
Potentiometric NOx Sensors," B. White, S. Chatterjee,
and E. D. Wachsman, Journal of the American Ceramic Society,
submitted.
- “Evaluation of the
Relationship Between Cathode Microstructure and Electrochemical
Behavior for SOFCs,” J.R. Smith, A. Chen, D. Gostovic, D. Hickey,
D. Kundinger, K.L. Duncan, R.T. DeHoff, K.S. Jones and E.D.
Wachsman, Solid State Ionics, submitted.
- “Screen-Printed Dense
Yttria-Stabilized-Zirconia Electrolytes for Anode-Supported Solid
Oxide Fuel Cells,” B. White, E. D. Wachsman, M. L. Grilli, E.
Traversa, A. Sanson, E. Roncari, and F. Pittalis,
International Journal of Applied Ceramic Technology,
submitted.
- “Doped Bismuth Ruthenate
Cathodes for IT-SOFCs,” A. Jaiswall and E.D. Wachsman, Ionics,
submitted.
- "Modeling Defect
Generation, Ambipolar Transport and Association in n-Type Mixed
Ionic-Electronic Conducting Oxides," K. L. Duncan and E. D.
Wachsman, Journal of the Electrochemical Society,
submitted.
- "Effect of
Potential-Dependent Boundary Conditions and Non-Linear Potentials
on Defect Distribution and Transport in n-Type Oxide Mixed
Ionic-Electronic Conductors," K. L. Duncan and E. D. Wachsman,
Journal of the Electrochemical Society, submitted.
- “Thermo-Chemical
Expansion of Undoped and Gadolinium-Doped Cerium Oxide and Yttria
Stabilized Zirconia,” S.R. Bishop, K. Duncan, and E. D. Wachsman,
Journal of the Electrochemical Society, submitted.
- “High Performance
Composite Bi2Ru2O7 - Bi1.6Er0.4O3
Cathodes for Intermediate Temperature SOFCs,” M. Camaratta and E.D.
Wachsman, Journal of the Electrochemical Society, accepted.
- “Three-Dimensional
Reconstruction of Porous LSCF Cathodes,” D. Gostovic, J.R. Smith,
K.S. Jones and E.D. Wachsman, Electrochemical and Solid State
Letters, 10, B214-217 (2007).
- “Effects of Reduction
Treatment on Fracture Properties of Cerium Oxide,” Y. Wang, K.
Duncan, E. D. Wachsman, and F. Ebrahimi, Journal of the
American Ceramic Society, accepted.
- “Silver-Bismuth Oxide
Cathodes for IT-SOFCs; Part II – Improving Stability Through
Microstructural Control,” M. Camaratta and E.D. Wachsman, Solid
State Ionics, 178, 1411-1418 (2007).
- “Silver-Bismuth Oxide
Cathodes for IT-SOFCs; Part I – Microstructural Instability,” M.
Camaratta and E.D. Wachsman, Solid State Ionics, 178,
1242-1247 (2007).
- “Deconvolution of SOFC
Cathode Polarization,” E.D. Wachsman, Solid Oxide Fuel Cells X,
ECS Transactions, K. Eguchi, S.C. Singhal, H. Yokokawa, and J.
Mizusaki, Ed, 7-1, 1051-1054 (2007).
- “Influence of Adsorption
and Catalytic Reaction on Sensing Properties of a Potentiometric
La2CuO4/YSZ/Pt Sensor,” J. Yoo, S.
Chatterjee, F. M. Van Assche, and E. D. Wachsman, Journal of
the Electrochemical Society, 154, J190 (2007).
- 97.“The Role of Point
Defects in the Physical Properties of Nonstoichiometric Ceria,” K.
Duncan, Y. Wang, S.R. Bishop, F. Ebrahimi, and E. D. Wachsman,
Journal of Applied Physics, 101, 044906 (2007).
- "General Model for the
Functional Dependence of Defect Concentration on Oxygen Potential
in Mixed Conducting Oxides," K. L. Duncan and E. D. Wachsman,
Ionics, 13, 127-140 (2007).
- “Bismuth Ruthenate –
Stabilized Bismuth Oxide Composite Cathodes for IT-SOFCs,” A.
Jaiswall, C.T. Hu, and E.D. Wachsman, Journal of the
Electrochemical Society, 154, B1088-1094 (2007).
- The Effect of Oxygen
Vacancy Concentration on Elastic Modulus of Flourite-Structured
Oxides,” Y. Wang, K. Duncan, E. D. Wachsman, and F. Ebrahimi,
Solid State Ionics, 178, 53-58 (2007).
- “A Co-doping Approach
Towards Enhanced Ionic Conductivity in Fluorite Based
Electrolytes,” S. Omar, E. D. Wachsman, and J. C. Nino, Solid
State Ionics, 177, 3199-3203 (2006).
- “Applicability of Bi2Ru2O7
Pyrochlore Electrodes for ESB and BiMEVOX Electrolytes,” V.
Esposito, B.H. Luong, E.D. Bartolomeo, E.D. Wachsman, and E.
Traversa, Journal of the Electrochemical Society, 153,
A2232-A2238 (2006).
- “The Role of Point
Defects in the Physical Properties of Fluorite Oxides,” K. L.
Duncan, Y. Wang, S. R. Bishop, F. Ebrahimi, and E. D. Wachsman,
Journal of the American Ceramic Society, 89, 3162-3166
(2006).
- “Stable and High
Conductivity Bilayered Electrolytes for Lower Temperature Solid
Oxide Fuel Cells,” J.Y. Park and E.D. Wachsman, Ionics,
12-1, 15-20 (2006).
- “Thermo-Chemical
Expansion of SOFC Materials,” S.R. Bishop, K.L. Duncan, and E. D.
Wachsman, Solid State Ionic Devices IV, ECS Transactions,
E.D. Wachsman, F.H. Garzon, E. Traversa, R. Mukundan, and V. Birss,
Ed., 1-7, 13-22 (2006).
- “Effects of Oxygen
Vacancy Concentration on Mechanical Properties of Cerium Oxide,”
Y. Wang, K.L. Duncan, E. D. Wachsman, and F. Ebrahimi, Solid
State Ionic Devices IV, ECS Transactions, E.D. Wachsman,
F.H. Garzon, E. Traversa, R. Mukundan, and V. Birss, Ed., 1-7,
23-34 (2006).
- “Development of Higher
Ionic Conductivity Ceria Based Electrolyte,” S. Omar, E. D.
Wachsman, and J. C. Nino, Solid State Ionic Devices IV,
ECS Transactions, E.D. Wachsman, F.H. Garzon, E. Traversa, R.
Mukundan, and V. Birss, Ed., 1-7, 73-82 (2006).
- “Doubly Doped Bi2O3
Electrolytes with Higher Conductivity,” D.W. Jung, K.L. Duncan,
and E. D. Wachsman, Solid State Ionic Devices IV, ECS
Transactions, E.D. Wachsman, F.H. Garzon, E. Traversa, R.
Mukundan, and V. Birss, Ed., 1-7, 63-72 (2006).
- “Screen-Printed Dense
Yttria-Stabilized-Zirconia Electrolytes for Anode-Supported Solid
Oxide Fuel Cells,” B. M. White, M. L. Grilli, E. Traversa, E.
Roncari, F. Pittalis, E. D. Wachsman and A. Sanson, Solid
State Ionic Devices IV, ECS Transactions, E.D. Wachsman,
F.H. Garzon, E. Traversa, R. Mukundan, and V. Birss, Ed., 1-7,
83-94 (2006).
- “Evaluation of Time
Constants Governing the Cathodic Reactions in SOFCs,” J. R. Smith,
M. Orazem, K. Duncan, A. Chen, and E. D. Wachsman, Solid State
Ionic Devices IV, ECS Transactions, E.D. Wachsman, F.H. Garzon,
E. Traversa, R. Mukundan, and V. Birss, Ed., 1-7, 243-254
(2006).
- “Synthesis and
Characterization of Y2Ru2O7 and Y2-xPrxRu2O7
for the Cathode Application in Intermediate Temperature Solid
Oxide Fuel Cells,” C. Abate, K. Duncan, V. Esposito, E. Traversa,
and E. D. Wachsman, Solid State Ionic Devices IV, ECS
Transactions, E.D. Wachsman, F.H. Garzon, E. Traversa, R.
Mukundan, and V. Birss, Ed., 1-7, 255-262 (2006).
- “Bi2Ru2O7
Pyrochlore Electrodes for Bi2O3 Based
Electrolyte for IT-SOFC Applications,” V. Esposito, B. H. Luong,
E. Di Bartolomeo, E. D. Wachsman, and E. Traversa, Solid State
Ionic Devices IV, ECS Transactions, E.D. Wachsman, F.H.
Garzon, E. Traversa, R. Mukundan, and V. Birss, Ed., 1-7,
263-278 (2006).
- “Ag-Bi1.6Er0.4O3
as a Potential Cathode Material for IT-SOFCs,” M. Camaratta and E.
D. Wachsman, Solid State Ionic Devices IV, ECS
Transactions, E.D. Wachsman, F.H. Garzon, E. Traversa, R.
Mukundan, and V. Birss, Ed., 1-7, 279-292 (2006).
- “Direct Current Bias
Studies on (Bi2O3)0.8(Er2O3)0.2
Electrolyte and Ag-(Bi2O3)0.8(Er2O3)0.2
Cermet Electrode,” A. Jaiswall and E.D. Wachsman, Solid State
Ionics, 177 (7-8), 677-685 (2006).
- “Effect of Harsh Anneals
on the LSM/YSZ Interfacial Impedance Profile,” J. R. Smith and E.
D. Wachsman, Electrochimica Acta, 51, 1585-91
(2006).
- “Pb2Ru2O6.5
as a Low-Temperature Cathode for Bismuth Oxide Electrolytes,” V.
Esposito, E. Traversa, and E.D. Wachsman, Journal of the
Electrochemical Society, 152 (12), A2300-2306 (2005).
- “Ionic Conduction in
Zirconia Films of Nanometer Thickness,” X. Guo, E. Vasco, S. Mi,
K. Szot, E. Wachsman, and R. Waser,’ Acta Materialia, 53,
5161-5166 (2005).
- “Schottky Barrier Formed
by Network of Screw Dislocations in SrTiO3,” X. Guo, Z.
Zhang, W. Sigle, E. D. Wachsman, and R. Waser, Applied Physics
Letters, 87, 162105 (2005).
- “Fabrication and
Characterization of High-Conductivity Bilayered Electrolytes for
Intermediate-Temperature Solid Oxide Fuel Cells,” J.Y. Park and
E.D. Wachsman, Journal of the American Ceramic Society,
88 [9], 2402-2408 (2005).
- “Fabrication of Anode
Supported Thick Film Ceria Electrolytes for IT-SOFCs,” A. Jaiswal
and E.D. Wachsman, Ionics, 11, 161-170 (2005).
- “Lower Temperature
Electrolytic Reduction of CO2 to O2 and CO
with High Conductivity Solid Oxide Bilayer Electrolytes,” J.Y.
Park and E.D. Wachsman, Journal of the Electrochemical Society,
152 (8), A1654-1659 (2005).
- “RuO2–Based
Dense Electrodes for ESB Electrolyte IT-SOFCs,” V. Esposito, E.
Traversa, and E.D. Wachsman, Solid Oxide Fuel Cells IX,
Electrochem. Soc., S.C. Singhal and J. Mizusaki, Ed, 2005-07,
1764-1772 (2005).
- “Ceramic PLD Coatings on
Ferritic Stainless Steel Interconnect in IT-SOFCs,” F. Mattu, E.D.
Wachsman and E. Traversa, Solid Oxide Fuel Cells IX,
Electrochem. Soc., S.C. Singhal and J. Mizusaki, Ed, 2005-07,
(2005).
- “Bismuth-Ruthenate-Based
Cathodes for IT-SOFCs,” A. Jaiswal and E.D. Wachsman, Journal
of the Electrochemical Society, 152, A787-790 (2005).
- “Preparation and
Characterization of Lead Ruthenate Based Composite Cathodes for
SOFC Applications,” V. Esposito, E. Traversa, and E.D. Wachsman,
Solid State Ionics-2004, Materials Research Society, P.
Knauth, C. Masqulier, E. Traversa, and E.D. Wachsman, Ed., 835,
217-222 (2005).
- "Hydrogen Permeability
of SrCe0.95Eu0.05O3-d (x = 0.05,
M = Eu, Sm)," S. J. Song, E. D. Wachsman, J. Rhodes, S. E. Dorris,
and U. Balachandran, Solid State Ionics, 167, 99-105
(2004).
- “Effect of Oxygen
Sublattice Order on Conductivity in Highly Defective Fluorite
Oxides,” E. D. Wachsman, Journal of the European Ceramic
Society, 24, 1281-1285 (2004).
- "Defect Structure and
n-Type Electrical Properties of SrCe0.95Eu0.05O3-d,"
S. J. Song, E. D. Wachsman, S. E. Dorris, and U. Balachandran,
Journal of the Electrochemical Society, 150, A1484
(2003).
- “Selective
Potentiometric Detection of NOx by Differential
Electrode Equilibria,” E.D. Wachsman, Solid State Ionic Devices
III, Electrochem. Soc., E.D. Wachsman, K.S. Lyons, M. Carolyn,
F. Garzon, M. Liu, and J. Stetter, Ed., 2002-26, 215-221
(2003).
- “Modeling the
Performance and Stability of Bilayer Electrolytes for
Low-Temperature Solid Oxide Fuel Cells,” K.L. Duncan and E.D.
Wachsman, Solid State Ionic Devices III, Electrochem. Soc.,
E.D. Wachsman, K.S. Lyons, M. Carolyn, F. Garzon, M. Liu, and J.
Stetter, Ed., 2002-26, 308-318 (2003).
- “Defect Structure and
n-Type Electrical Properties of SrCe0.95Eu0.05O3-d,”
S. Song, E.D. Wachsman, S.E. Dorris and U. Balachandran, Solid
State Ionic Devices III, Electrochem. Soc., E.D. Wachsman, K.S.
Lyons, M. Carolyn, F. Garzon, M. Liu, and J. Stetter, Ed.,
2002-26, 456-470 (2003).
- “Stable High
Conductivity Bilayered Electrolytes for Low Temperature Solid
Oxide Fuel Cells,” J.Y. Park and E.D. Wachsman, Solid Oxide
Fuel Cells VIII, Electrochem. Soc., S.C. Singhal and M. Dokiya,
Ed, 2003-07, 289-298 (2003).
- "Italy-USA Joint
Doctorate Program in Materials for Environmental and Energy
Applications," E. Traversa and E. D. Wachsman, Journal of
Materials Education, 24, 109-114 (2002).
- "Functionally Gradient
Bilayer Oxide Membranes and Electrolytes," E. D. Wachsman,
Solid State Ionics, 152-153, 657-662 (2002).
- "A Higher Conductivity
Bi2O3-Based Electrolyte," N. Jiang, E. D.
Wachsman, and S. H. Jung, Solid State Ionics, 150,
347-353 (2002).
- "Structural Stability
and Conductivity of (WO3)x(Dy2O3)y(Bi2O3)1-x-y,"
S. H. Jung, E. D. Wachsman, and N. Jiang, Ionics, 8,
210-214 (2002).
- "Defect Chemistry
Modeling of High-Temperature Proton-Conducting Cerates," S. J.
Song, E. D. Wachsman, S. E. Dorris, and U. Balachandran, Solid
State Ionics, 149, 1-10 (2002).
- "Stable Mixed-Conducting
Bilayer Membranes for Direct Conversion of Methane to Syngas," E.
D. Wachsman and T.L. Clites, Journal of the Electrochemical
Society, 149 (3) A242-246 (2002).
Books and Book
Chapters
- Solid State Ionic
Devices IV, E.D. Wachsman, F.H. Garzon, E. Traversa, R.
Mukundan, and V. Birss, Ed., The Electrochemical Society Inc.,
Pennington, NJ, 1-7, 407 pages, ISBN 1-56677-494-2, 2006.
- Solid State Ionics -
2004, P. Knauth, C. Masqulier, E. Traversa, and E.D. Wachsman,
Ed., Materials Research Society, Warrendale, PA, 835, 378
pages, ISBN 1-55899-783-0, 2005.
- Solid State Ionic
Devices III, E.D. Wachsman, K.S. Lyons, M. Carolyn, F. Garzon,
M. Liu, and J. Stetter, Ed., The Electrochemical Society Inc.,
Pennington, NJ, 2002-36, 535 pages, ISBN 1-56677-388-1,
2003.
- "Designing for
Thermochemical Applications," E.D. Wachsman, in An Introduction
to Ceramic Engineering Design, D.E. Clark, D.C. Folz, and T.D.
McGee, Ed., American Ceramic Society, 329-346, ISBN 1-57498-131-5,
2002.
- "Solid-State Ionic Devices V," The
Electrochemical Society, Washington D.C., October 7-12, 2007.
- "Fourth International Symposium on
Solid Oxide Fuel Cells: Materials, Science and Technology, "
American Ceramic Society, Daytona Beach, January 21-26, 2007.
- "Fundamental Mechanisms of SOFC
Cathode Reactions, " UF-DOE High Temperature Electrochemistry
Center Workshop, Cocoa Beach, January 27, 2006.
- "Solid-State Ionic Devices IV,"
The Electrochemical Society, Los Angeles, October 16-21, 2005.
- "Solid-State Ionics," Materials
Research Society, Boston, November 29-December 3, 2004.
- "Solid-State Ionic Devices III,"
The Electrochemical Society, Salt Lake City, October 20-25, 2002.
- International SOFC Symposium in
Taiwan, May 28-June 3, 2005, Taipei, Taiwan.
- NATO Advanced Research Workshop,
“Mixed Ionic-Electronic Conducting (MIEC) Perovskites for Advanced
Energy Systems,” June 1-5, 2003, Kiev, Ukraine.
- US Department of Energy, “Fuel
Cell Report to Congress,” February 21-22, 2002, Washington DC.
- European Union, “Euroconference on
Science and Technology of Ionics,” September 15-21, 2002, Rhodes,
Greece.
|
|
|
|