Jessica Bronson
- Graduate Research Assistant
Department of Mechanical and Aerospace Engineering
231 MAE-A, P.O. Box 116250
Gainesville, FL 32611-6250
Telephone: (352)846-1164
FAX: (352)392-7303
email:jraeb@ufl.edu
- 2002, B.S. in Mechanical Engineering from the University of Missouri-Columbia
- 2006, M.S. in Mechanical Engineering from the University of Florida
- Ph.D. in Mechanical Engineering from the University of Florida, in progress. Expected Graduation Spring 2007
- Sandia National Laboratories Vice Presidential Fellowship
- 2003, 2004, 2005, 2006 MESA Institute Fellow
- J. Bronson, G. Wiens, Feedback Control of MEMS Micromirrors Subject to Parametric Uncertainty, Proceedings of IDETC/CIE 2007 ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference September 4-7, 2007, Las Vegas, NV, USA. (pdf)
- G. Wiens, R. Wagner, A. Valdez, J. Bronson, Mechanically-Adaptive Fixture Element for Directional Control of Contact Interface Forces, The Second Annual International Conference on Micromanufacuring, ICOMM 2007, September 10-13, 2007, Clemson University, Greenville, SC.
- J. Bronson, G. Wiens, Characterizations and Development of Error Metrics for Control of Micromirror Arrays, International Conference on Multibody Dynamics 2007, June 25-28, 2007, Milano, Italy. (pdf)
- J. Bronson, G. Wiens, J. Palmer, J.R. Meyer, Feasibility Study of Mechanically Adaptive Microfabrication Process Tooling and Fixturing,The First Annual International Conference on Micromanufacuring, ICOMM 2006, September 13-15, 2006, University of Illinois at Ubana-Champaign. (pdf)
- J. Bronson, G. Wiens, Control of Micro Mirrors for High Precision Performance, Proc. of 2006 Florida Conf. on Recent Advances in Robotics, May 25-26, 2006, Miami, FL. (pdf)
- G. Roman, J. Bronson, G. Wiens, J. Jones, J. Allen, Design of a Piezoresistive Surface Micromachined Three-Axis Force Transducer for Microassembly, Proceedings of IMECE 2005: International Mechanical Engineering Conference and Exposition November 5-11, 2005, Orlando, Florida (pdf)
- J. Bronson, G. Wiens, J. Allen, Modeling and Alleviating Instability in a MEMS Vertical Comb Drive using a Progressive Linkage , Proceedings of IDETC/CIE 2005 ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference September 24-28, 2005, Long Beach, California, USA (pdf)
- J. Bronson, Effects of Electrostatic Instability on the Performance of MEMS Actuators, Proc. of 2005 Florida Conf. on Recent Advances in Robotics, May 5-6, 2005, University of Florida, Gainesville, FL. (pdf)
- J. Bronson, J. Allen, G. Wiens, Modeling and Characterization of the Scratch Drive Actuator, Proceedings of IMECE: ASME 2004, Nov. 13-19, 2004, Anaheim, CA (pdf)
- J. Bronson, G. Wiens, R. Trans-Son-Tay, A Feasibility Study on MEMS Test-Structures for Analysis 0f Cells and Tissue, Proc. of 2004 Florida Conf. on Recent Advances in Robotics, May 6-7, 2004, University of Central Florida, Orlando, FL (pdf)
- Microelectromechanical Systems (MEMS)
- Modeling and Characterization of the Scratch Drive Actuator
- Robotics and Control
- Sandia National Laboratories
- Tau Beta Pi - The Engineering Honor Society
- Path Planning for Mapping Unknown Environments