|
For a complete list go to the website of
the research members
1.
Yi-Chung, Haftka, Nestor V and Benjamin J,(2009) “Two-Dimensional
Surrogate Contact Modeling for Computationally Efficient Dynamic Simulation
of Total Knee Replacements”, Journal of Biomechanical Engineering, Vol. 131
/ 041010-1
2.
Herencia, J.E., Haftka, R.T., Weaver, P.M., and Friswell,
M.I., (2008) “Lay-Up Optimization of Composite Stiffened Panels Using
Linear Approximations in Lamination Space” (TN), AIAA Journal, 46(9),
2387-2391.
3.
An, A., Acar, A., Haftka, R.T., Kim, N.H., Ifju, P.G, and
Johnson, T.F., (2008) “Being Conservative with a Limited Number of Test
Results,” Journal of Aircraft, 45(6), 1969-1975.
4.
Gogu, C., Haftka, R.T., Le Riche, R., Molimard, J., Vautrin,
A., and Sankar, B.V., (2008) “Comparison between the basic least squares
and the Bayesian approach for elastic constants identification”, Journal of
Physics: Conference Series, Vol. 135, No. 012045.
5.
Kurdi, M.H., Haftka, R.T., Schmitz, T.L., and Mann, B.P., “A
Robust Semi-Analytical Method for Calculating the Response Sensitivity of a
Time Delay System,” Journal of Vibration and Acoustics, 130 (6): 6
pages.
6.
Lin, Y.-C., Haftka, R.T., Queipo, N.V., and Fregly, B.J.,
“Two-dimensional surrogate contact modeling for computationally efficient
dynamic simulation of total knee replacements,” Journal of Biomechanical
Engineering, (In press).
7.
Goel, T., Haftka, R.T., Shyy, W., and Watson, L.T., (2008),
“Pitfalls of using a single criterion for selecting experimental designs,”
International Journal for Numerical Methods in Engineering, 75: 127 –
155.
8.
Goel, T., Dorney, D.J., Haftka, R.T., and Shyy, W., (2008)
“Improving the Hydrodynamic Performance of Diffuser Vanes via Shape
Optimization,” Computers and Fluids, 37 (6), 705-723.
9.
Samad, A., Wei, Shyy., Kim, K.-Y., Goel, T., and Haftka, R.T.,
(2008), “Multiple Surrogate Modeling for Axial Compressor Blade Shape
Optimization,” Journal of Propulsion and Power24 (2):
302-310.
10.
Kale, A.A, and Haftka, R.T., (2008) “Tradeoff of Weight and
Inspection Cost in Reliability-Based Structural Optimization,” Journal of
Aircraft, 45 (1): 77-85.
11.
Kale, A.A, Haftka, R.T., and Sankar, B.V., (2008) “Efficient
Reliability Based Design and Inspection of Stiffened Panels against
Fatigue,” Journal of Aircraft, 45 (1): 86-97.
12.
J. Akbari and N. H. Kim, Shape Sensitivity Analysis and
Optimization with Design-Dependent Loadings: Equivalence between Continuum
and Discrete Derivatives, Structural and Multidisciplinary Optimization,
submitted, 2008
13.
Samad, A., Shin, D.-Y., Kim, K.-Y., Goel, T., and Haftka,
R.T., (2007), “Surrogate Modeling for Optimization of Dimpled Channel to
Enhance Heat Transfer Perormance,” Journal of Thermophysics and Heat
Transfer, 21 (3): 667-670.
14.
Martinez, O.A, Sankar, B.V., Haftka, R.T., Bapanapalli, S.K.,
Max L. Blosser, M.L., (2007), “Micromechanical Analysis of Composite Corrugated-Core
Sandwich Panels for Integral Thermal Protection Systems,” AIAA Journal,
45(9): (2323-2336).
15.
Schutte, J.F., Haftka, R.T., and Fregly, B.J. (2007) “Improved
global convergence probability using multiple independent optimizations,”
International Journal of Numerical Methods in Engineering, 71(6) 678-702,
August.
16.
Acar, E., Kale, A., and Haftka, R.T. (2007)“Comparing
Effectiveness of Measures That Improve Aircraft Structural Safety,” Journal
of Aerospace Engineering, 20(3): 186-199.
17.
Acar, E., and Haftka, R.T., (2007) “Reliability-Based Aircraft
Structural Design Pays, Even with Limited Statistical Data,” J.Aircraft, 44
(3): 812-823.
18.
Missoum, S., Ramu, P., and Haftka, R.T., (2007), “A Convex
Hull Approach for the Reliability-Based Design Optimization of Nonlinear
Transient Dynamic Problems,” Comput. Methods Appl. Mech. Engrg., 196
,2895-2906.
19.
Goel, T., Haftka, R.T., Shyy, W., Queipo, N.V., (2007)
“Ensemble of Multiple Surrogates”, Structural and Multidisciplinary
Optimization, 33(3): 199-216.
20.
Goel, T., Vaidyanathan, R., Haftka, R.T., Shyy, W., Queipo,
N.V., and Tucker K., (2007) “Response Surface Approximation of Pareto
OptimalFront in Multi-objective Optimization,” Computer Methods in Applied
Mathematics and Engineering, 196 (4-6), 879-893.
21.
Mack, Y., Goel, T.,Shyy, W., Haftka, R.T., “Surrogate
Model-based Optimization Framework: A Case Study in Aerospace Design”, to
appear in Evolutionary Computation in Dynamic and Uncertain Environments,
Editors S. Yang, Y.S. Ong, and Y. Jin, Springer Kluwer Academic
Press.
22.
Acar, E., Haftka, R.T., and Johnson, T.F., (2007) “Tradeoff of
Uncertainty Reduction Mechanisms for Reducing Weight of Composite
Laminates,” ASME Journal of Mechanical Design, 129 (3),
266-274.
23.
Reinbolt, J.A., Haftka, R.T., Chmielewski, T.L., and Fregly,
B.J., (2007) “Are Patient-Specific Joint and Inertial Parameters Needed for
Accurate Inverse Dynamics Analyses of Gait?” IEEE Transaction on Biomedical
Engineering, 54 (5), 782-793.
24.
Papila, M., Haftka, R.T., Nishida, T, and Sheplak, M., (2006)
“Piezoelectric Microphone Design Pareto Optimization: Tradeoff Between
Sensitivity and Noise Floor,” Journal of Micromechanical Systems, 15(6),
1632-1643.
25.
Haftka, R.T., Rosca, R.I., and Nikolaidis, E., (2006), “An
Approach for Testing Methods for Modeling Uncertainty,” Journal of
Mechanical Design 128 (5) 1038-1049.
26.
Groenwold, A.A., and Haftka, R.T., (2006) “Optimization with
Non-homogeneous Failure Criteria like Tsai-Wu for Composite Laminates,”
Structural and Multidisciplinary Optimization, 32 (3),
183-190.
27.
Hosder, S. Grossman, B., Haftka, R. T., Mason, W. H., and
Watson, L. T. (2006), “Quantitative Relative Comparison of CFD Simulation
Uncertainties for a Transonic Diffuser,” Computers and Fluids, 35 (10),
1444-1458, December.
28.
Ramu, P., Qu, X., Youn, B.D, and Choi, K.K., (2006), “Inverse
reliability measures and reliability-based design optimization,” Int. J.
Reliability and Safety 1 (1/2) 187-205.
29.
Koh, B.-I., George, A.D., Haftka, R.T., and Fregly, B.J.,
(2006), “Parallel Asynchronous Particle Swarm Optimization,” International
Journal for Numerical Methods in Engineering 67 (4) 578-595,
July.
30.
Goel, T., Haftka, R. T., Papila, M., Shyy, W., (2006)
“Generalized Bias Error Bounds for Response Surface Approximation,”
International Journal of Numerical Methods in Engineering 65 (12)
2035-2059, March.
31.
Haftka, R.T., and Watson, L.T., (2006) “Decomposition Theory
for Multidisciplinary Design Optimization Problems with Mixed Integer
Quasiseparable Subsystems,” Optimization and Engineering, 7,
135–149.
32.
Acar, E., Haftka, R.T., Sankar, B.V. and Qui, X., (2006)
“Increasing Allowable Flight Loads by Improved Structural Modeling,” AIAA
Journal, 44 (2), 376-381.
33.
Acar, E., Kale, A., Haftka, R.T., and Stroud, W.J., (2006)
“Structural Safety Measures for Airplanes,” Journal of Aircraft, 43 (1),
30-38.
34.
Grosset, L., Le Riche, R., and Haftka, R.T., (2006) “A
double-distribution statistical algorithm for composite laminate
optimization,” Structural and Multidisciplinary Optimization, 31 (1),
49-59.
35.
Huang, J., Rapoff, A.J., and Haftka, R.T., (2006) “Attracting
cracks for arrestment in bone-like composites,” Materials & Design, 29
(6), 461-469.
36.
K. Y. Yi, K. K. Choi, N. H. Kim, and M. E. Botkin,
Continuum-based design sensitivity analysis and optimization of nonlinear
shell structure using meshfree method, Int. J. Num. Methods Eng., Vol. 68,
No.2, pp. 231-266, 2006.
37.
Huang, J., and Haftka, R.T., (2005) “Optimization of fiber
orientations near a hole for increased load carrying capacity of composite
laminates,” Structural and Multidisciplinary Optimization, 30 (5),
335-341.
38.
Schutte, J.F., Koh, B.I., Reinbolt, J.A., Fregly, B.J., Haftka
R.T. and George, A.D., “Evaluation of a Particle Swarm Algorithm For
Biomechanical Optimization.,” J. Biomech.,Vol. 127, pp. 465-474,
2005.
39.
Van Keulen, F., Haftka, R.T, and Kim, N.H., “Review of options
for structural design sensitivity analysis. Part 1: Linear systems,”
Computer Methods in Applied Mechanics and Engineering, Volume 194, Issues
30-33 , 12 August 2005, Pages 3213-3243.
40.
Reinbolt, J. A., Schutte, J. F., Fregly, B. J., Koh, B. I.,
Haftka, R. T., George, A. D., and Mitchell, K. H., “Determination of
patient-specific multi-joint kinematic models through two-level
optimization.” Journal of Biomechanics 38, 621-626, 2005.
41.
Queipo, N.V., Haftka, R.T., Shyy, W., Goel, T., Vaidyanathan,
R., Tucker, P.K., “Surrogate-based analysis and optimization,” Progress in
Aerospace Sciences, 41, pp. 1-28, 2005.
42.
Haftka, R.T., and Watson, L.T., “Multidisciplinary Design
Optimization with Quasiseparable Subsystems,” Optimization and Engineering,
6, 9–20, March 2005.
43.
Papila, M., Haftka, R. T. and Watson, L. T., “Pointwise Bias
Error Bounds for Response Surface Approximations and Min-Max Bias Design,”
AIAA Journal, Vol. 43 (8) pp. 1797-1807, August 2005.
44.
N. H. Kim, Shape design sensitivity analysis of nonlinear
structural systems, in Optimization of Structural and Mechanical Systems,
Edited by J. S. Arora, submitted, 2005.
45.
Venkataraman,; S., Haftka, R. T., Sankar, B. V., Zhu; H.,
Blosser, M. L., "Optimal Functionally Graded Metallic Foam Thermal
Insulation, AIAA Journal, 2004 vol. 42 no. 11, pp. 2355-2363.
46.
Schutte, J.F., Reinbolt, J.A., Fregly, B.J., Haftka, R.T., and
George, A.D., “Parallel global optimization with the particle swarm
algorithm,” Int J Numerical Methods in Engineering, 61(13), 2296-2315,
December 2004.
47.
Zhu, H., Sankar, B.V., Haftka, R.T., Venkataraman, S., and
Blosser, M., “Optimization of functionally graded metallic foam insulation
under transient heat transfer conditions,” Structural and Multidisciplinary
Optimization,” 28 (5): 349-355 Nov. 2004
48.
Soundappan P, Nikolaidis E, Haftka R.T, Grandhi, R., and
Canfield, R., “Comparison of evidence theory and Bayesian theory for
uncertainty modeling,” Reliability Engineering & System Safety 85
(1-3): 295-311 Jul-Sep 2004.
49.
Qu, X., Venter, G., and Haftka, R.T., “New formulation of
minimum-bias central composite experimental design and Gauss Quadrature,”
Structural and Multidisciplinary Optimization, 28(4), pp. 231-242,
2004.
50.
Venkataraman, S., and Haftka, R.T., “Structural optimization
complexity: what has Moore’s law done for us?,” Structural and
Multidisciplinary Optimization, 28(6), pp. 375-387, 2004.
51.
Zhu, H., Sankar, B.V., Haftka, R.T., Venkataraman, S., and
Blosser, M., “Minimum Mass Design of Insulation Made of Functionally Graded
Material,” J. Spacecraft and Rockets, (EN), pp. 467-469,
2004.
52.
Grosset, L., Le Riche, R. and Haftka, R.T., “A study of the
effects of dimensionality on stochastic hill climbers and estimation of
distribution algorithms,” Lecture Notes in Computer Science, Vol. 2936, selected
and revised papers from the 6th International Conference on Artificial
Evolution (EA03), Springer Verlag, May 2004, pp. 27-38.
53.
Liu, B., Haftka, R.T., and Watson L.T., “Global-Local
Structural Optimization Using Response Surfaces of Local Optimization
Margins,” Structural and Multidisciplinary Optimization, 27(5), 352-359,
2004.
54.
Qu, X., and Haftka, R.T., “Reliability-Based Design
Optimization Using Probability Sufficiency Factor,” Structural and
Multidisciplinary Optimization, 27(5), 314-325, 2004.
55.
Nikolaidis, E. Chen S., Cudney, H., Haftka, R.T., and Rosca,
R., “Comparison of Probability and Possibility for Design Against
Catastropic Failure Under Uncertainty.” ASME Journal of Mechanical Design,
Vol. 126, pp. 386-394, May 2004.
56.
Lian, Y., Shyy, W., and Haftka, R.T., “Shape Optimization of a
Membrane Wing for Micro Air Vehicles (TN),” AIAA Journal 42(2), 424-426,
2004.
57.
Liu, B. , and R.T. Haftka (2004) “Single-level composite wing
optimization based on flexural lamination parameters,” Structural and
Multidisciplinary Optimization, 26, 111-120.
58.
Liu, B. , and R.T. Haftka, “Maximization of Composite Wing
Weight Using Flexural Lamination Parameters,” Structural and
Multidisciplinary Optimization, Vol. 26, pp. 111-120, Springer Verlag,
2004.
59.
Papila, M., and Haftka, R.T., “Implementation of a Crack
Propagation Constraint within Structural Optimization Software,” Structural
and Multidisciplinary Optimization, 25(5-6), pp. 327-338,
2003.
60.
Huang, J., Venkataraman, S., Rapoff, A.J., and Haftka, R.T.,
“Optimization of Axisymmetric Elastic Modulus Distributions around a Hole
for Increased Strength,” Structural Optimization, 25(4), pp. 1-12,
2003.
61.
Ragon, S. A., Gürdal, Z., Haftka, R. T., Tzong, T. J. “Bilevel
Design of a Wing Structure using Response Surfaces,” Journal of Aircraft,
Vol. 40, No.5, September/October 2003, pp. 985-992.
62.
Qu, X., Haftka, R.T., Venkataraman, S., and Johnson, T.F.,
“Deterministic and Reliability-Based Optimization of Composite Laminates
for Cryogenic Environments,” AIAA Journal, 41(10), pp. 2029-2036,
2003.
63.
Lamberti, L., Venkataraman, S., Haftka, R.T., and Johnson,
T.F., “Preliminary Design Optimization of Stiffened Panels Using
Approximate Analysis Models,” International Journal for Numerical Methods in
Engineering, 57 (10), pp. 1351-1380, 2003.
64.
Venkataraman, S., Lamberti, L., Haftka, R.T., and Johnson,
T.F., “Challenges in Comparing Numerical Solutions for Optimum Weights of
Stiffened Shells”, Journal of Spacecraft and Rockets, 40(2), pp. 183-192, 2003.
65.
Venkataraman, S., Haftka, R.T., and Rapoff, A.J., “Structural
Optimization using Biological Variables to Help Understand How Bones Design
Holes,” Structural Optimization, 25(1), pp. 19-34, 2003.
66.
Kim, H., Haftka, R.T., Mason, W.H., Watson, L.T., and
Grossman, B., “Probabilistic Modeling of Errors from Structural
Optimization Based on Multiple Starting Points,” Optimization and
Engineering, Vol. 3, pp. 415-430, 2002.
67.
Vitali, R., Haftka, R.T., and Sankar, B.V., “Multi-fidelity
design of stiffened composite panel with a crack,” Structural Optimization
23(5), pp. 347-356, June 2002.
68.
C.A. Baker, B. Grossman, R.T. Haftka, W.H. Mason and L.T.
Watson, “High-Speed Civil Transport Design Space Exploration Using
Aerodynamic Response Surface Approximations,” Journal of Aircraft, Vol. 39,
No. 2, March-April 2002, pp. 215-220.
69.
Vitali, R., Park, O., Haftka, R.T., Sankar, B.V., and Rose,
C.A.,“Structural Optimization of a Hat-Stiffened Panel Using Response
Surfaces,” Journal of Aircraft, 39(1), pp. 158-166, 2002.
70.
N. H. Kim, K. K. Choi, J. S. Chen, and M. E. Botkin, Meshfree
analysis and design sensitivity analysis for shell structures, Int. J. Num.
Methods Eng., Vol. 53, No. 9, 2087-2116, 2002.
71.
N. H. Kim, K. Y. Yi, and K. K. Choi, A material derivative
approach in design sensitivity analysis of 3-D contact problems, Int. J.
Solids and Structures, Vol. 39, No. 8, pp. 2087-2108, 2002.
72.
Baker, C.A., Watson, L. T., Grossman, B., Mason, W. H. and
Haftka, R. T., “Parallel global aircraft configuration design space
exploration”, Internat. J. Compuer. Research, 10 (4) 2001,
501-515.
73.
Cox, S.E., Haftka, R.T., Baker, C.A., Grossman, B., Mason,
W.H., and Watson, L.T., “A Comparison of Global Optimization Methods for
the Design of a High-speed Civil Transport,” J. of Global Optimization, 21,
pp. 415-433, 2001.
74.
Gern, F.H., Ko, A., Sulaeman, E., Gundlach, J.F., Kapania,
R.K., and Haftka, R.T., “Multidisciplinary Design Optimization of a
Transonic Commercial Transport with Strut-Braced Wing,” J. Aircraft,” 38(6),
November-December, 2001, pp. 1006-1014.
75.
Hosder, S., Watson, L.T., Grossman, B., Mason, W.H., and Kim,
H., “Polynomial Response Surface Approximations for Multidisciplinary
Design Optimization of a High Speed Civil Transport,” Optimization and Engineering,
2, 431-452, 2001.
76.
Kim, H, Papila, M., Mason, W. H., Haftka, R. T., Watson, L.
T., and Grossman, B., “Detection and Repair of Poorly Converged
Optimization Runs,” AIAA J., 39(12), December 2001, pp.
2242-2249.
77.
Nikolaidis, E., and Haftka, R.T., “Theories of Uncertainty for
Risk Assessment when Data is Scarce,” International Journal for Advanced
Manufacturing Systems, 4(1), 49-56, 2001.
78.
Akgün, M.A., Haftka, R.T, Wu, K.C., Walsh, J.L and Garcelon,
J.H., “Efficient Structural Optimization for Multiple Load Cases Using
Adjoint Sensitivities,” AIAA Journal, 39(3), 511-516, 2001.
79.
Park, O., Haftka, R.T., Sankar, B.V., Starnes, J.H., and
Nagendra, S., “Analytical-Experimental Correlation for a Stiffened Composite
Panel Loaded in Axial Compression,” Journal of Aircraft, 38 (2), 379-387,
2001.
80.
Akgün, M.A., Garcelon, J.H., and Haftka, R.T., “Fast Exact
Linear and Non-linear Structural Reanalysis and the
Sherman-Morrison-Woodbury Formulas,” International Journal for Numerical
Journal in Engineering, 50(7), 1587-1606, 2001.
81.
Venkataraman, S., Haftka, R.T., and Johnson, T.F., “Maximal
Errors due to Use of Equivalent Properties for Sublaminates,” AIAA Journal
39(2), 2001.
82.
Goel, A., Baker, C. A. Shaffer, C.A., Grossman, B., Mason,
W.H., Watson, L.T., and Haftka, R.T., “VizCraft: a problem solving
environment for configuration design of a high speed civil transport”,
Computing in Science and Engineering., 3 56-66, 2001.
83.
Soremekun,G., Gürdal, Z., Haftka, R.T., and Watson, L.T.,
“Composite laminate design optimization by genetic algorithm with
generalized elitist selection,” Computers & Structures, 79(2), pp.
131-143, 2001.
84.
N. H. Kim, Y. H. Park, and K. K. Choi, Optimization of a
hyper-elastic structure with multibody contact using continuum-based shape
design sensitivity analysis, Structural and Multidisciplinary Optimization,
Vol. 21, No. 3, 196-208, 2001.
85.
N. H. Kim, K. K. Choi, and J. S. Chen, Structural optimization
of finite deformation elastoplasticity using continuum-based design
sensitivity formulation, Computers and Structures, Vol. 79, No. 20-21, pp.
1959-1976, 2001.
86.
N. H. Kim and K. K. Choi, Design sensitivity analysis and
optimization of nonlinear transient dynamics, Mechanics of Structures and
Machines, Vol. 29, No. 3, pp. 351-371, 2001.
87.
John F. Gundlach, J.F., Tetrault, P-A., Gern, F.H.,
Naghshineh-Pour, A.H., Ko, A., Schetz, J.A., Mason, W.H., Kapania, R.K.,
Grossman, B., and Haftka, R.T., “Conceptual Design Studies of a
Strut-Braced Wing Transonic Transport," Journal of Aircraft, Vol. 37,
No. 6, Nov-Dec 2000, pp. 976-983.
88.
Papila, M., and Haftka, R.T., “Response Surface
Approximations: Noise, Error Repair, and Modeling Errors,” AIAA Journal
38(12), pp. 2336-2343, 2000.
89.
Liu, B., Haftka, R.T., and Akgün M.A., “Two-Level Composite
Wing Structural Optimization Using Response Surfaces,” Structural
Optimization, 20(2), pp. 87-96, 2000.
90.
Madsen, J.I., Shyy, W., and Haftka, R.T., “Response Surface
Techniques for Diffuser Shape Optimization,” AIAA Journal, 38(9), pp.
1512-1518, 2000.
91.
Garcelon, J.H., haftka, R.T., and Scotti, J.S.,
“Approximations in Optimization of Damage Tolerant Structures,” AIAA
Journal, 38(3), pp. 517-524, 2000.
92.
Venter, G., and Haftka, R.T., “Two-Species Genetic Algorithm
for Design under Worst Case Conditions,” Evolutionary Optimization
(internet Journal), 2(1), pp. 1-19, 2000.
93.
Liu,B. Haftka R.T., Akgün M. and Todoroki, A., “Permutation
Genetic Algorithm For Stacking Sequence Design Of Composite Laminates”,
Computer Methods in Applied Mechanics and Engineering, 186, pp. 357-372,
2000.
94.
Kajiwara, I. and Haftka, R. T., "Integrated Design of
Aerodynamics and Control System for Micro Air Vehicles," JSME
International Journal, Vol. 43, No. 3, 2000, pp. 684-690.
95.
N. H. Kim, K. K. Choi, J. S. Chen, and Y. H. Park, Meshless
shape design sensitivity analysis and optimization for contact problem with
friction, Computational Mechanics, Vol. 25, No. 2/3, pp. 157-168, 2000.
96.
N.H.
Kim, K. K. Choi, and J. S. Chen, Shape design sensitivity analysis and
optimization of elasto-plasticity with frictional contact, AIAA Journal,
Vol. 38, No. 9, pp. 1742-1753, 2000.
|
